Análisis del proceso constructivo y variabilidad de parámetros geotécnicos en la capacidad de carga de micropilotes usando elementos finitos aleatorios

Autores/as

DOI:

https://doi.org/10.4067/S0718-28132012000100006

Palabras clave:

método de elementos finitos, simulaciones Montecarlo, elastoplasticidad, micropilotes

Resumen

En la práctica normal de ingeniería de cimentaciones se calcula la capacidad de carga de un micropilote sin tener en cuenta que el proceso constructivo puede afectar la geometría del problema. En este trabajo se cuantifica la influencia tanto del proceso constructivo como de la variabilidad inherente de las propiedades del suelo en la capacidad de carga de un micropilote autoperforante e inyectado, a través de simulaciones de la excavación con elementos finitos aleatorios. Se obtiene que al no tener en cuenta el método constructivo del micropilote y la variabilidad de las propiedades del suelo, se sobreestima en un factor entre dos y tres la capacidad de carga por fuste. Por lo tanto, se presenta una explicación racional al factor de seguridad que se debe aplicar para obtener la capacidad de carga de diseño. Finalmente, se presenta un procedimiento para generar cartas de diseño de micropilotes autoperforantes materializado en uno que resalta la importancia de considerar la variabilidad inherente de las propiedades del suelo y el método constructivo.

Referencias

Ang, A. and Tang, W. (2007). Probability concepts in engineering. 2nd Edition. John Wiley and Sons.

Baecher, G. and Christian, J. (2003). Reliability and statistics in geotechnical engineering. John Wiley and Sons.

Baroth, J. and Malecot, Y. (2010). Probabilistic analysis of the inverse analysis of an excavation problem. Computers and Geotechnics 37, 391-398. https://doi.org/10.1016/j.compgeo.2009.12.006

Burland, J.B. (1973). Shaft friction of piles in clay - a simple fundamental approach. Ground Engineering 6(3), 30-42.

Cherubini, C. (2000). Probabilistic approach to the design of anchored sheet pile walls. Computers and Geotechnics 26, 309-330. https://doi.org/10.1016/S0266-352X(99)00044-0

Delgado, M. (2001). Ingeniería de fundaciones. Editorial Escuela Colombiana de Ingeniería.

Fellin, W., King, J., Kirsch, A. and Oberguggenberger, M. (2010). Uncertainty modelling and sensitivity analysis of tunnel face stability. Structural Safety 32, 402-410. https://doi.org/10.1016/j.strusafe.2010.06.001

FHWA (2000). Micropile design and construction guidelines. Implementation Manual. USA Department of Transportation, Federal Highway Administration.

Griffiths, D., Fenton, G. and Tveten, D. (2005). Probabilistic passive earth pressure analysis by the random Finite Element Method. Prediction, analysis and design in geomechanical applications. Proceedings of the Eleventh International Conference on Computer Methods and Advances in Geomechanics, Torino, Italy, 19-24 June, Vol. 4.

Haldar, S. and Babu, S. (2008). Effect of soil spatial variability on the response of laterally loaded pile in undrained clay. Computer and Geotechnics 35, 537-547. https://doi.org/10.1016/j.compgeo.2007.10.004

Harahap, I. and Wong, C. (2008). Soil parameters and bearing capacity derived from responses of drilled shaft socketed into rock. Proceedings of International Conference of Construction and Building Technology E (32), 391-402.

Helwany, S. (2007). Applied Soil Mechanics with ABAQUS Applications. 1st edition. John Wiley and Sons.

Huang, J., Griffiths, D. and Fenton, G. (2010). Probabilistic analysis of coupled soil consolidation. Journal of Geotechnical and Geoenvironmental Engineering 136 (3), 417-430. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000238

Kamruzzaman, M. and Lye, L. (2008). Probabilistic Analysis of Laterally Loaded Pile-Soil Systemusing Monte Carlo Simulation. Proceedings of the Eighth ISOPE Pacific/Asia Offshore Mechanics Symposium. Bangkok, Thailand, November 10-14.

Kuo, Y., Jaksa, M., Kaggwa, W., Fenton, G., Griffiths, D. and Goldsworthy, J. (2004). Probabilistic analysis of multi-layered soil effects on shallow foundation settlement. Proceedings in 9th Australia-New Zealand Conference on Geomechanics, Auckland, New Zealand.

Luo, Z., Atamturktur, S., Yuanqiang, C. and Hsein Juang, C. (2012). Reliability analysis of basal-heave in a braced excavation in a 2-D random field. Computers and Geotechnics 39, 27-37. https://doi.org/10.1016/j.compgeo.2011.08.005

Mendoza, C.C., Ruge, J., Cunha, R. P. y Lizcano, A. (2011). Comportamiento mecánico de excavaciones de pequeño diámetro para suelo estructurado "pilote Alluvial Anker". 14a Conferencia Panamericana de Mecánica de Suelos e Ingeniería Geotécnica. Toronto, Ontario, Canadá .

Niandou, H. and Breysse, D. (2007). Reliability analysis of a piled raft accounting for soil horizontal variability. Computers and Geotechnics 34, 71-80. https://doi.org/10.1016/j.compgeo.2006.09.006

Papaioannou, I. and Straub, D. (2012). Reliability updating in geotechnical engineering including spatial variability of soil. Computers and Geotechnics 42, 44-51. https://doi.org/10.1016/j.compgeo.2011.12.004

Phoon, K.K. and Kulhawy, F. (1999). Characterization of geotechnical variability. Canadian Geotechnical Journal 4 (36), 612-624.

Poulos, H.G. and Davis, E.H. (1980). Pile foundation analysis and design. 1st edition. John Wiley and Sons.

Prada, L.F., Ramos, A., Solaque, D. y Caicedo, B. (2011). Confiabilidad aplicada al diseño geotécnico de un mutro de contención. Obras y Proyectos 9, 49-58. https://doi.org/10.4067/S0718-28132011000100006

Sentz, K., and Ferson, S. (2011). Probabilistic bounding analysis in the quantification of margins and uncertainties. Reliability Engineering and System Safety 96 1126-1136. https://doi.org/10.1016/j.ress.2011.02.014

Tandjiria, V., Teh, C. and Low, B. (2000). Reliability analysis of laterally loaded piles using response surface methods. Structural Safety 22, 335-355. https://doi.org/10.1016/S0167-4730(00)00019-9

Wang, G. and Sitar, N. (2011). Static and dynamic axial response of drilled piers. II Numerical simulation. Journal of Geotechnical and Geoenvironmental Engineering 12 (137), 1143-1153. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000548

Zevgolis, I. and Bourdeau, P. (2010). Probabilistic analysis of retaining walls. Computers and Geotechnics 37, 359-373. https://doi.org/10.1016/j.compgeo.2009.12.003

Descargas

Publicado

2012-06-01

Número

Sección

Artículos

Cómo citar

Análisis del proceso constructivo y variabilidad de parámetros geotécnicos en la capacidad de carga de micropilotes usando elementos finitos aleatorios. (2012). Obras Y Proyectos, 11, 61-70. https://doi.org/10.4067/S0718-28132012000100006